Description
Instax mini Evo is a camera with a wide range of creative possibilities.
The number of recorded pixels is 2560 x 1920
Own memory for about 45 photos, there is a microSD/microSDHC memory card slot
Focal length f = 28 mm (equivalent to 35 mm film)
Aperture F2.0
Autofocus -Frame-by-frame autofocus (with autofocus backlight)
The minimum focal length is from 10 cm to the end.
Shutter speed from 1/4 second to 1/8000 second (automatic switching)
ISO 100-1600 (automatic switching)
Program AE (Automatic Exposure control)
Exposure control from -2.0 EV to +2.0 EV (1/3 EV step)
TTL measurement method-measurement in 256 zones, multipoint
White Balance - Auto (Auto), Fine (High quality), Shade (Shadow), Fluorescent 1 (Fluorescent. light 1), Fluorescent 2 (Fluorescent. light 2), Fluorescent 3 (Fluorescent. light 3), Incandescent (Incandescent lamp)
Flash ,Auto Flash / Forced Flash / Flash disabled
Flash Shooting Distance: Approximately 50 cm to 1.5 m
Self-timer (timer) - About 2 seconds/ about 10 seconds
Effects for images - 10 effects for lens, 10 effects for film (Total 100 effects when multiplying the above values)
Printing functions
The number of pixels when printing 1600 x 600 pixels (800 x 600 pixels when printing from an application on a smartphone)
Print resolution 25 dots/mm x 12.5 dots/mm
Gradation when printing -RGB gradation, 256 colors
The format of the printed image is JPEG images taken by this device
The print speed is approximately 16 seconds (* Plus 7 seconds when printing in instax-Rich mode immediately after launch)
Printing functions
Images stored in the device's own memory and images from a memory card are available for printing
Functions available through the smartphone app
The function of printing an image from a smartphone, the function of shooting with remote control, the function of transferring the printed image, the function of updating the firmware
LCD screen
3.0-inch color TFT LCD screen
Number of pixels: Approximately 460,000 pixels"
External interface
Micro USB Micro-B (charging only)
Food
Lithium-ion battery (built-in type: non-removable)
Charging Function,Built-in
The possible number of printed images is about 100 (from the moment of full charging)
Charging time is about 2-3 hours
Dimensions of the main device
87 mm x 122.9 mm x 36 mm (except protruding parts)
Weight of the main device
About 285 g
Operating conditions
Temperature: 5℃ - 40℃
Humidity: 20% - 80% (non-condensing)